This 6 second excerpt from the film Wanted (T. Bekmambetov , 2008, copyright 2008 Universal Studios and Ringerike Gmbh & Co. Luftfahrtbeteiligungs KG) showcases image deformation. In order to comply with the Fair Use doctrine in teaching and research, resolution is limited to 360p and the clip has been shortened to only encompass the subject of interest.In the following excerpt, a character's face is seen through the transparent body of a water dispenser, deforming his features as the... Topic: image deformation
These notes are based on a series of lectures given at the Tata Institute in January-February, 1973. The lectures are centered about the work of M. Scahlessinger and R. Elkik on infinitesimal deformations. Lecture Notes Collection FreeScience.info ID2660 Obtained from http://www.math.tifr.res.in/~publ/ln/tifr54.pdf http://www.freescience.info/go.php?pagename=books&id=2660 Topics: Deformation theory, "
This 11 second excerpt from the film Excalibur (J. Boorman, 1981, copyright MCMLXXXI Orion Pictures Company) showcases image deformation. In order to comply with the Fair Use doctrine in teaching and research, sound has been cut out, resolution limited to 360p and the clip has been shortened to only encompass the subject of interest.In the following excerpt, a character's face is seen through a transparent ball, magnifying his features as he discovers an unusual environment. The deformation of... Topic: image deformation
This 16 second excerpt from the film Invasion of the Body Snatchers (P. Kaufman, 1978, copyright MCMLXXVIII United Artists Corp.) showcases image deformation. In order to comply with the Fair Use doctrine in teaching and research, resolution is limited to 360p and the clip has been shortened to only encompass the subject of interest.In the following excerpt, two characters are reflected by a concave metallic surface as one is on the phone and the other tries to catch his attention. The... Topic: image deformation
This 8 second excerpt from the film The Andromeda Strain (R. Wise, 1971, copyright MCMLXX by Universal Pictures) showcases image deformation. In order to comply with the Fair Use doctrine in teaching and research, sound has been cut out, resolution limited to 360p and the clip has been shortened to only encompass the subject of interest.In the following excerpt, a character in a state of shock watches his environment warp before him. The dynamic distortion of the environment conveys his altered... Topic: image deformation
Florentin Smarandache generalized several properties of the nedians. Here, we will continue the series of these results and will establish certain connections with the triangles which have the same coefficient of deformation. Topics: properties of the nedians, coefficient of deformation
The 'Institute for Scientific and Educational Technology' has been established to provide a mechanism through which universities and other research organizations may cooperate with one another and with different government agencies and industrial organizations to further and promote research, education, and training programs in science, engineering, and related fields. This effort has been undertaken consistent with the national vision to 'promote excellence in America s educational system... Topics: ROTATING DISKS, DEFORMATION, STRESSES, CROSS SECTIONS
The main goal of this investigation is the attempt to use theearlier developed autowave theory of plasticity to describethe rock deformation, i.e. silvinite, marble and sandstone. Tovisualize the localization patterns observed by mechanicaltesting a technique of double‐exposure speckle‐photographyhas been used. The development of localized plasticdeformation has an autowave character. The autowavesresulting from the compressing process of the rock sampleshave propagation rates... Topics: Plastic Deformation, Localization, Speckle Photography, Autowaves, Rock
The present work consist of general framework for numerical simulation of sheet metal blanking process using finite element method. Blanking consist of a metal forming operation characterized by complete metal separation. Experimental observations are shown that during shearing process large plastic deformation will generated in sheet, it should be considered during designing and manufacturing of blanking die. The work discuses some of the issues involved in blanking modeling and analyze... Topics: Deformation, Numerical Simulation, Blanking, FEA, FEM, EQV.
Deformation Microstructures and Mechanisms in Minerals and RocksAuthor: Tom Blenkinsop Published by Springer Netherlands ISBN: 978-0-412-73480-9 DOI: 10.1007/0-306-47543-XTable of Contents:Introduction and Terminology Cataclasis Diffusive Mass Transfer by Solution Intracrystalline Plasticity Diffusive Mass Transfer and Phase Transformations in the Solid State Magmatic and Sub-magmatic Deformation Microstructural Shear Sense Criteria Shock-induced microstructures and shock metamorphism From... Topics: Petrofabric analysis, Rock deformation, Deformations (Mechanics), Microstructure
The effect of deformation, deformation rate and temperature on the toughness and macroscopic work-hardening rate of a recycled lead alloy part whose chemical composition is shown in table 1 was investigated in the temperature range of room temperature to 200oC, and in the deformation rate range of 0.3s-1 to 2.3s-1. A high-low-temperature thermo-mechanical treatment technique was employed for this study. Lead alloy from waste batteries of cars were recycled into... Topics: Thermo, Mechanical Treatment, Toughness, Mascropic, Work-Hardening Rate, Deformation, Deformation...
The effect of deformation, deformation rate and temperature on the toughness and macroscopic work-hardening rate of a recycled lead alloy part whose chemical composition is shown in table 1 was investigated in the temperature range of room temperature to 200oC, and in the deformation rate range of 0.3s-1 to 2.3s-1. A high-low-temperature thermo-mechanical treatment technique was employed for this study. Lead alloy from waste batteries of cars were recycled into simple cylindrical parts by means... Topics: Thermo, Mechanical Treatment, Toughness, Mascropic, Work-Hardening Rate, Deformation, Deformation...
High temperature tests of dimensional changes accompanying plastic deformation of pyrolytic graphite Topics: HIGH TEMPERATURE TESTS, PLASTIC DEFORMATION, PYROLYTIC GRAPHITE, TENSILE DEFORMATION, CRYSTAL...
Data Shit - Reconstruction Deformation (EP-2011) 01 - Time is a disease 02 - Black lines 03 - Cubic organism 04 - At least we have Mcdonald's 05 - The ghost of my girlfriend's house 06 - Hypertrophy Data Shit email@example.com www.facebook.com/pages/Data-Shit/190008097706579 www.myspace.com/563140837 Released on Torn Flesh Records, August, 2011 www.myspace.com/tornfleshrecords www.archive.org/details/tornfleshrecords www.facebook.com/tornfleshrecords On Twitter @tornfleshrecs DOWNLOAD NOW... Topics: Data, Shit, Reconstruction, Deformation, Torn, Flesh, Records, IDM, Breakcore, Electronic
The deformation modulus of rock mass can eitherbe measured using in-situ field tests or estimated empirically.However, the empirical method is an attractive and openchoice for researchers to estimate the deformation modulus ofrock mass economically, efficiently and accurately and manyresearchers have proposed empirical equations for estimationthe deformation modulus of rock mass based rock massclassification systems. In this paper attempt has been made tocollect and review some these published... Topics: Deformation modulus, Rockmass, Estimation methods, Empirical, Gaussian, Sigmoidal
The industrial processing of sintered powder preform has been developed for manufacturing various engineering components. The present investigation has been undertaken to analyze the deformation characteristics during the cold forging of sintered aluminium preform at low strain rates. Experiments have been conducted and measurements made on deformation during cold forging on aluminium preforms with lubricated end conditions. Experimentally obtained flow load and plastic work done are in good... Topics: Sintered powder preform, deformation characteristics, flow stress, plastic work done
THE NATURE AND CHARACTERISTICS, AND THE CONDITIONS OF AIRCRAFT SPIN ARE STUDIED IN A CONVENTIONAL, AND SPIN WIND TUNNEL. AN ANEMOMETER TECHNIQUE WAS ADAPTED FOR THIS PURPOSE. THE RESULTS PROVIDE BETTER INSIGHT INTO THE SPIN PHENOMENON, AND FORM A BASIS FOR DEVELOPING MEANS OF RECOVERING FROM SPIN. THE USE OF A PARACHUTE AND AUXILIARY JETS AS MEANS OF MASTERING AIRCRAFT SPIN ARE STUDIED. Topics: ALLOYS, METALS, ALLOYING, IRON ALLOYS, NUCLEAR DEFORMATION, SHEAR STRESS
The study of laminated magnetostrictive functionally graded material (FGM) plate without shear deformation under thermal sinusoidal vibration and transient response is calculated by using the generalized differential quadrature (GDQ) method. In the thermoelastic stress-strain relations that containing a power-law function of a two-material FGM plate, the linear temperature rise and the magnetostrictive coupling terms with velocity feedback control. Four edges of rectangular laminated Terfenol-D... Topics: Magnetostrictive, FGM, Shear Deformation, Thermal Vibration, GDQ, Velocity Feedback Control
This report covers the initial activities and deliberations of a continuing working group asked to assist the SETI Program Office at NASA. Seven chapters present the group's consensus on objectives, strategies, and plans for instrumental R&D and for a microwave search for extraterrestrial in intelligence (SETI) projected for the end of this decade. Thirteen appendixes reflect the views of their individual authors. Included are discussions of the 8-million-channel spectrum analyzer... Topics: DEPOSITION, ROCKS, SEDIMENTS, VOLCANOLOGY, DEFORMATION, EARTH CRUST, MAPPING, SOILS
Jet impingement cooling of a hypersonic airfoil leading edge is experimentally investigated using thermochromic liquid crystals (TLCS) to measure surface temperature. The experiment uses computer data acquisition with digital imaging of the TLCs to determine heat transfer coefficients during a transient experiment. The data reduction relies on analysis of a coupled transient conduction - convection heat transfer problem that characterizes the experiment. The recovery temperature of the jet is... Topics: FREE VIBRATION, CRITICAL LOADING, DIFFERENTIAL EQUATIONS, DEFORMATION, FREQUENCIES, LOADS (FORCES)
Ovaling deformations develop when waves propagateperpendicular to the tunnel axis. Two analytical solutions areused for estimating the ovaling deformations and forces incircular tunnels due to soil–structure interaction underseismic loading. In this paper, these two closed form solutionswill be described briefly, and then a comparison between thesemethods will be made by changing the ground parameters.Differences between the results of these two methods incalculating the magnitudes of thrust... Topics: Seismic analyses, ovaling deformation, circular tunnel, soil-structure
The present study deals with the assessment ofhigher order theory of laminated beams under staticmechanical loads. The theory has been presented for generallay-up of the laminate. The displacement field is expressed interms of only three primary displacement variables bysatisfying exactly the conditions of zero transverse shear stressat the top and bottom and its continuity at layer interfaces.The governing equations of motion and boundary conditionsare derived using virtual work. The number of... Topics: Composite Beams, First Order Shear Deformation Theory, Third Order Theory
byUnderwood, Lauren W.; Goward, Samuel N.; Fearon, Matthew G.; Fletcher, Rose; Garvin, Jim; Hurtt, Georg
The cover image incorporates high resolution stereo pairs acquired from the DigitalGlobe(R) QuickBird sensor. It shows a digital elevation model of Meteor Crater, Arizona at approximately 1.3 meter point-spacing. Image analysts used the Leica Photogrammetry Suite to produce the DEM. The outside portion was computed from two QuickBird panchromatic scenes acquired October 2006, while an Optech laser scan dataset was used for the crater s interior elevations. The crater s terrain model and image... Topics: COMPUTATIONAL FLUID DYNAMICS, DEFORMATION, DRAG, ALGORITHMS, SHAPES, SONIC BOOMS
Post-localization damage-like constitutive models suitable for capturing deformation in geomaterials. Features a cohesive zone model which tracks opening and sliding degrees of freedom on crack surface as well as plastic-like friction model. Computational robustness of simulations is enhanced with an implicit-explicit integration scheme. Examples show the efficacy of model in being able to realistically capture failure in boundary value problems with complex geometries. Topics: strong discontinuity, enhanced strain finite element, bifurcation, localized deformation, robustness
A preliminary investigation of a simple 5 deg conical-flow expander was made to determine the feasibility of using this type of device to increase the Mach number in the test section of a supersonic wind tunnel. The inlet-to-exit area ratio of the nozzle was that required to increase one-dimensional flow from a Mach number of 3.88 to 5.5. The Mach numbers obtained at the expander exit varied from about 5.1 at the centerline to about 5.4 near the walls. No difficulty in operation of the main... Topics: DEFORMATION, HYSTERESIS, MEMBRANES, FATIGUE (MATERIALS), ELASTIC PROPERTIES, PRESSURE DISTRIBUTION,...
Stability of axially symmetric deformation of axially symmetric shells for concentrated force and uniform outer pressure loading systems Topics: AXIAL STRAIN, SYMMETRY, AXISYMMETRIC DEFORMATION, LOADING, SHELL STABILITY, AXISYMMETRIC FLOW,...
Long-term changes in the composition of the atmosphere are known to have significant effects on atmospheric chemistry and stratospheric ozone. Increasing levels of greenhouse gases have the potential to change the global climate in the middle and upper atmospheres, as well as in the troposphere. Volcanic eruptions, El Nino events, and other natural variations can also cause changes in atmospheric composition and climate. Whether the causes are natural or manmade, changes in the global climate... Topics: AEROELASTICITY, LENSES, SELECTION, SHROUDS, TARGETS, TRANSONIC WIND TUNNELS, DEFORMATION, FLAPPING,...
The Space Plasma, High Voltage Interaction Experiment (SPHINX) is the name given to an auxiliary payload satellite scheduled to be launched in January 1974. The principal experiments carried on this satellite are specifically designed to obtain the engineering data on the interaction of high voltage systems with the space plasma. The classes of experiments are solar array segments, insulators, insulators with pin holes and conductors. The satellite is also carrying experiments to obtain flight... Topics: MECHANICAL PROPERTIES, STRESS ANALYSIS, VISCOELASTICITY, DEFORMATION, ELASTIC PROPERTIES, MATERIALS...
Experimental work has been carried out to reveal quantitative data on some aspects of deformation and barrelling characteristics on hot deformation of sintered low alloy high strength AISI 8640 steel containing the composition of 0.4%C , 0.28%Si, 0.83%Mn, 0.5%Cr, 0.55%Ni and remaining 97.24%Fe, during axial hot upset forging at 1100°±10°C through powder preform forging in the way of powder metallurgy process. Cylindrical green compacts of three different aspectratios of 0.6, 0.9and 1.2 were... Topics: Deformation, Densification, Sintering, Barrelling, Arc Radius, Circular Arc